Secondary - Girts (w/ Panel Punching)
Note: Links on this page to SED's & Fab Drawing will only be available for BlueScope Employees.
(Revised: 11/17/13)

Outset Girts
Inset Girts
Special Set Girts
Simple Girts
Outset Corner Girts
Inset Corner Girts
Gable Girts
Hip Corner Girts
Girt Filler Angles

Outset Girts: top

Welded Clip (WS01G3)		Clip = Special Clip = 1/2" x 1 1/2" Bolts =			GC1 GCA- Welded (6) 49080
Bolted Clip			3 Plate Column Clip = 3 Plate Special Clip = Gage Column Clip = 1/2" x 1 1/2" Bolts =			PG1 GCD- GCW1 Bolted (8) 49080
3 Plate Column Gage Column	(WS01G3) (WS02B3)
7" Outset Continuous / Bypass Girt to Colum
10 1/2" Lap Adjustment = 1'-4 1/2" Lap Adjustment = 1'-10 1/2" Lap Adjustment = 2'-10 1/2" Lap Adjustment = 3'-10 1/2" Lap Adjustment =				Frame CL + 11 3/4" Frame CL + 1'-5 3/4" Frame CL + 1'-11 3/4" Frame CL + 2'-11 3/4" Frame CL + 3'-11 3/4"			(Code = 1) (Code = 2) (Code = 3) (Code = 4) (Code = 5)
8 1/2" Outset Continuous / Bypass Girt to Column
10 1/2" Lap Adjustment = 1'-4 1/2" Lap Adjustment = 1'-10 1/2" Lap Adjustment = 2'-10 1/2" Lap Adjustment = 3'-10 1/2" Lap Adjustment =				Frame CL + 11 3/4" Frame CL + 1'-5 3/4" Frame CL + 1'-11 3/4" Frame CL + 2'-11 3/4" Frame CL + 3'-11 3/4"			(Code = 1) (Code = 2) (Code = 3) (Code = 4) (Code = 5)

Welded Clip (WS01V3)		Clip = Special Clip = 1/2" x 1 1/2" Bolts =			GCA- (1/4" thick) GCA- Welded (8) 49080
Bolted Clip			3 Plate Column Clip = 3 Plate Special Clip = Gage Column Clip = 1/2" x 1 1/2" Bolts =			GCD- (1/4" thick) GCD- GCW1 Bolted (10) 49080
3 Plate Column Gage Column	(WS01V3) (WS02L3)
10" Outset Continuous / Bypass Girt to Column
1'-4 1/2" Lap Adjustment = 1'-10 1/2" Lap Adjustment = 2'-10 1/2" Lap Adjustment = 3'-10 1/2" Lap Adjustment =				Frame CL + 1'-5 3/4" Frame CL + 1'-11 3/4" Frame CL + 2'-11 3/4" Frame CL + 3'-11 3/4"			(Code = 2) (Code = 3) (Code = 4) (Code = 5)
11 1/2" Outset Continuous / Bypass Girt to Column
1'-10 1/2" Lap Adjustment = 2'-10 1/2" Lap Adjustment = 3'-10 1/2" Lap Adjustment =				Frame CL + 1'-11 3/4" Frame CL + 2'-11 3/4" Frame CL + 3'-11 3/4"			(Code = 3) (Code = 4) (Code = 5)

Inset Girts: top

Welded Clip (WS01R2)		Girt Adjustment = 8 1/2" Clip = 10" Clip = Special Clip = 1/2" x 1 1/2" Bolts = Punched Filler Angle =	Frame CL - 1 1/4" (Code = E) GC2 GCB- (1/4" thick) GCB- Girt on 1 Side: (2) 49080 Girt on 2 Sides: (4) 49080 GFAP-
Bolted Clip		Girt Adjustment = 8 1/2" Clip = 10" w/ 3 Plate Column Clip = 10" w/ Gage Column Clip = Special Clip = 1/2" x 1 1/2" Bolts =		Frame CL - 1 1/4" (Code = E) GC5 GCE- (1/4" thick) GC91A GCE- Girt on 1 Side: (4) 49080 Girt on 2 Sides: (6) 49080
3 Plate Column Gage Column	(WS01H2) (WS03C2)
8 1/2" & 10" Inset Girt to Column Limitations: Max Flange Width = 1'-2" Max Flange Thickness = 7/8"

Special Set Girts: top

Welded Clip		Girt Adjustment = 7", 8 1/2", & 10" Clip = 11 1/2" Clip = 1/2" x 1 1/2" Bolts = Punched Girt Filler Angle =	5" - 6" Flange Width = Frame CL - 3 1/4" (Code = G) 7" - 12" Flange Width = Frame CL - 6 1/4" (Code = L) 13" - 16" Flange Width = Frame CL - 9 1/4" (Code = Q) GCB- GCZ- Girt on 1 Side: (2) 49080 Girt on 2 Sides: (4) 49080 GFAP-
7", 8 1/2", 10" Girts 11 1/2" Girts	(WS01T2) (WS01U2)
Bolted Clip		Girt Adjustment = 7", 8 1/2", & 10" Clip = 11 1/2" Clip = 1/2" x 1 1/2" Bolts = Punched Girt Filler Angle =	5" - 6" Flange Width = Frame CL - 3 1/4" (Code = G) 7" - 12" Flange Width = Frame CL - 6 1/4" (Code = L) 13" - 16" Flange Width = Frame CL - 9 1/4" (Code = Q) GCE- GCZZ- Girt on 1 Side: (4) 49080 Girt on 2 Sides: (6) 49080 GFAP-
7", 8 1/2", 10" Girts 11 1/2" Girts	(WS01T2) (WS01U2)
Flush Girts, Special Set Girts, and Large Column Flanges to Column 7", 8 1/2", 10" & 11 1/2" Girts

Welded Clip 7" Inset Girt (WS01S2)	Girt Adjustment = L Shape Clip = U Shape Clip = 1/2" x 1 1/2" Bolts = Punched Girt Filler Angle =	5" - 6" Flange Width = Frame CL - 3 1/4" (Code = G) 7" - 12" Flange Width = Frame CL - 6 1/4" (Code = L) 13" - 16" Flange Width = Frame CL - 9 1/4" (Code = Q) GCL- GCU- (2) 49080 GFAP-
Special Set L & U Clips) 7", 8 1/2", 10" & 11 1/2" Girts

Simple Girts: top

Welded Clip		Girt Adjustment = 7" & 8 1/2" Clip = 10" & 11 1/2" Clip = Special Clip = 1/2" x 1 1/2" Bolts = Punched Panel Adaptor Clip =	Frame CL - 1/4" (Code = D) GC1 GCA- (1/4" thick) GCA- (4) 49080 543333 (Not Automated)
3 Plate Column 3 Plate w/ 543333	(WS01G2) (WS01Q2)
Bolted Clip		Girt Adjustment = 7" & 8 1/2" Clip = 10" & 11 1/2" Clip = Special Clip = Gage Column Clip = 1/2" x 1 1/2" Bolts = Punched Panel Adaptor Clip =	Frame CL - 1/4" (Code = D) PG1 GCD- (1/4" thick) GCD- GCW1 (6) 49080 543333 (Not Automated)
3 Plate Column 3 Plate w/ 543333 Gage Column Gage w/ 543333	(WS01G2) (WS01Q2) (WS02B6) (WS02B7)
Outset Simple Butted Girt to Column 7", 8 1/2", 10" & 11 1/2" Girts

Welded Clip (WS01M3)		Girt Adjustment = 7" & 8 1/2" Clip = 10" & 11 1/2" Clip = Special Clip = 1/2" x 1 1/2" Bolts =		Frame CL + 5 3/4" (Code = B) GC1 GCA- (1/4" thick) GCA- (2) 49080
Bolted Clip			Girt Adjustment = 7" & 8 1/2" Clip = 10" & 11 1/2" Clip = Special Clip = Gage Column Clip = 1/2" x 1 1/2" Bolts =		Frame CL + 5 3/4" (Code = B) PG1 GCD- (1/4" thick) GCD- GCW1 (4) 49080
3 Plate Column Gage Column	(WS01M3) (WS02B2)
Outset Simple Lap Girt to Column 7", 8 1/2", 10" & 11 1/2" Girts

Outset Corner Girts: top

3 Plate Column - Welded Clip (WS12N2)	Sidewall Girt Adjustment = Endwall Girt Adjustment = 7" & 8 1/2" Clip = 10" & 11 1/2" Clip = Special Clip = Col. - 1/2" x 1 1/2" Bolts = Punched Girt Filler Angle =	BL - 1/4" 7" & 8 1/2" SW Girt = BL - 9 1/4" (Code = Q) 10" & 11 1/2" SW Girt = BL - 1'-0 1/4" (Code = U) GC1 GCA- (1/4" thick) GCA- (2) 49080 GFAP-
3 Plate Column - Bolted Clip (WS12N2)	Sidewall Girt Adjustment = Endwall Girt Adjustment = 7" & 8 1/2" Clip = 10" & 11 1/2" Clip = Special Clip = Col. - 1/2" x 1 1/2" Bolts = Punched Girt Filler Angle =	BL - 1/4" 7" & 8 1/2" SW Girt = BL - 9 1/4" (Code = Q) 10" & 11 1/2" SW Girt = BL - 1'-0 1/4" (Code = U) PG1 GCD- (1/4" thick) GCD- (4) 49080 GFAP-
Gage Column - Bolted Clip (WS12KF)	Sidewall Girt Adjustment = Endwall Girt Adjustment = Clip = Col. - 1/2" x 1 1/2" Bolts = Punched Girt Filler Angle =	BL - 1/4" 7" & 8 1/2" SW Girt = BL - 9 1/4" (Code = Q) 10" & 11 1/2" SW Girt = BL - 1'-0 1/4" (Code = U) GCW1 (4) 49080 GFAP-
Outset Continuous Girts to Corner Column 7", 8 1/2", 10" & 11 1/2" Girts

	Variable Corner Clips Width 7" EW Girt = 8 1/2" EW Girt = 10" EW Girt = 11 1/2" EW Girt = Thickness 3/16" = Length 7" SW Girt = 8 1/2" SW Girt = 10" SW Girt = 11 1/2" SW Girt = VCC- 1/2" x 1 1/2" Bolts =	VCC i i e s s i i e i i e 0 5 4 0 7 0 0 8 4 1 0 0 s s 0 3 i i e 1 0 4 0 9 0 1 0 4 0 9 0 (4) 49080
Variable Corner Clip (VCC-) 7", 8 1/2", 10" & 11 1/2" Girts

Bolted Clip		Endwall Girt Adjustment = 7" EW, 1'-0" BL to CL = 8 1/2" EW, 1'-0" BL to CL = 10" EW, 1'-3" BL to CL = 11 1/2" EW, 1'-3" BL to CL = 1/2" x 1 1/2" Bolts =	BL - 1/4" GC17 p134 GC17 p120 GC21 p134 GC21 p120 (4) 49080
7" Inset SW 8 1/2" & 10" Inset SW 11 1/2" Inset SW Open SW Wide Flange Column Gage Corner Post	(WS12GD) (WS12GB) (WS12GC) (WS12H5) (WS12J2) (WS12K2)
Outset / Bypass Endwall Girt to Column Fl 7" & 8 1/2" Outset / Bypass Endwall Girts, 1'-0" BL to CL Frame 10" & 11 1/2" Outset / Bypass Endwall Girts, 1'-3" BL to CL Frame

Inset Corner Girts: top

3 Plate Column - Welded Clip		Endwall Adjustment = 7" EW, 6" BL to CL = 8 1/2" EW, 6" BL to CL = 10" EW, 6" BL to CL = 11 1/2" EW, 6" BL to CL = 1/2" x 1 1/2" Bolts = Punched Girt Filler Angle =	Column Flange Inside - 1 1/4" GC64- GC65- GC66- GC67- (2) 49080 GFAP-
Outset SW 7" Inset SW 8 1/2" & 10” Inset SW 11 1/2" Inset SW Open SW	(WSR026) (WSR028) (WSR029) (WSR030) (WSR035)
3 Plate Column - Bolted Clip		Endwall Adjustment = 7" EW, 6" BL to CL = 8 1/2" EW, 6" BL to CL = 10" EW, 6" BL to CL = 11 1/2" EW, 6" BL to CL = 1/2" x 1 1/2" Bolts = Punched Girt Filler Angle =	Column Flange Inside - 1 1/4" GC33- GC34- GC62- GC63- (4) 49080 GFAP-
Outset SW 7" Inset SW 8 1/2" & 10” Inset SW 11 1/2" Inset SW Open SW	(WSR026) (WSR028) (WSR029) (WSR030) (WSR035)
7” EW Girt SED’s
Outset SW 7” Inset SW 8 1/2” & 10” Inset SW 11 1/2" Inset SW Open SW	(WSR027) (WSR031) (WSR032) (WSR033) (WSR034)

Gage Column - Bolted Clip		Endwall Adjustment = 7" EW, 6" BL to CL = 8 1/2" EW, 6" BL to CL = 10" EW, 6" BL to CL = 11 1/2" EW, 6" BL to CL = 1/2" x 1 1/2" Bolts = Punched Girt Filler Angle =	Column Flange Inside - 1 1/4" GC35- GC36- GC72- GC73- (4) 49080 GFAP-
Outset SW 7” inset SW 8 1/2" & 10” Inset SW 11 1/2" Inset SW Open SW	(WSR036) (WSR038) (WSR039) (WSR042)
7” EW Girt SED’s
Outset SW 7” Inset SW 8 1/2” & 10” Inset SW 11 1/2" Inset SW Open SW	(WSR037) (WSR040) (WSR041) (WSR043)
Inset / Flush Endwall Girt to Column Fl 7", 8 1/2", 10" & 11 1/2" Endwall Girts 0'-6" BL to CL Frame

Gable Girts: top

Bolted Clip		7" EW, 6" BL to CL = 8 1/2" EW, 6" BL to CL = 10" EW, 6" BL to CL = 11 1/2" EW, 6" BL to CL = 7" EW, 1'-0" BL to CL = 8 1/2" EW, 1'-0" BL to CL = 10" EW, 1'-3" BL to CL= 11 1/2" EW, 1'-3" BL to CL= 1/2" x 1 1/2" Bolts =	GC19L, GC19R p074 GC18 p060 GC19L GC19R p074 GC20 p060 GC18 p134 GC18 p120 GC18 p134 GC20 p120 (4) 49080
Outset EW Inset EW	(WS04C2) (WS04E2)
Endwall Girt to Rafter FI 7", 8 1/2", 10" & 11 1/2" Inset / Flush Endwall Girts, 0'-6" BL to CL Frame 7" & 8 1/2" Outset / Bypass Endwall Girts, 1'-0" BL to CL Frame 10" & 11 1/2" Outset / Bypass Endwall Girts, 1'-3" BL to CL Frame

Hip Corner Girts: top

Hip Corner Clips
Note: These are possible connections that could be used for hip corners.
These options are not automatically detailed or designed.

Girt Filler Angles: top

Girt Filler Angle Punched Calculation GFAP-

The GFAP should lap past the 2^nd panel punch by 2 3/4".

The GFAP should lap past the 2^nd panel punch by 2 3/4" on both girts.